Australian Visa Options For Electricians

Did you know that a range of occupations for electricians, including general, special class and automotive electricians, may be nominated for a skilled visa to Australia? There are a range of skilled visa options available to migrate to Australia as an electrician, including options that grant immediate electrician PR in Australia, temporary visas as well as provisional visas which provide a pathway for electrician immigration Australia.

In this article, we take a look at how electricians are classified and defined in Australia for migration purposes and the skilled electrician visa Australia options available, including permanent residency pathways. This includes state, employer and family electrician sponsorship Australia visas.

But before we discuss the skilled visa options that are available for electricians to migrate to Australia, let us first introduce you to some of the key elements that must be considered when assessing your eligibility for a skilled Australia electrician visa.

Skilled Occupation List

A key component in determining your eligibility for a skilled visa to Australia is based on whether your occupation is included on the Skilled Occupation List (SOL) for the relevant skilled visa being considered. It is important to be aware that each skilled visa subclass is subject to a specified SOL, which is designed to respond to skill shortages in various industries and regions across Australia. As labour markets change, so too do the relevant SOLs to reflect pertaining market conditions. It is therefore vital that you apply the correct and most up-to-date SOL in assessing your eligibility for a skilled visa to Australia.

Please note that as of 25 November 2023, there have been changes to occupation requirements for the Temporary Residence Transition (TRT) stream of the Subclass 186 Employer Nomination Scheme (ENS) visa. Occupations are no longer required to be specified in a SOL to be eligible for an ENS visa. Instead, the nominated occupation must be listed in the ANZSCO and the nominated worker must continue to work in the occupation nominated for their TSS visa (ANZSCO 4-digit occupation unit group code).

Targeted Approach

Certain skilled visa options go one step further by targeting skills shortages in certain geographical areas (including in regional Australia). Employers can also sponsor or nominate suitably skilled applicants to fill vacancies in individual businesses, thereby addressing an employer-specific need. An example of this is an employer sponsored Subclass 482 Temporary Skill Shortage (TSS) visa.

There are several skilled visa options available for electricians, with each one designed to meet a specific purpose, as outlined above. These comprise an independent, state sponsored, regional state sponsored, regional employer sponsored, regional family sponsored, employer sponsored and nominated skilled visa as well as a training and temporary graduate skilled visa.

A Subclass 491 Skilled Work Regional (Provisional) visa is an example of a regional state or family sponsored skilled electrician visa Australia.

A regional employer-sponsored Australia electrician visa is the Subclass 494 Skilled Employer Sponsored Regional (Provisional) (SESR) visa.

And a permanent residence employer nominated option is the Subclass 186 Employer Nomination Scheme (ENS) visa.

Each skilled visa subclass is subject to a prescribed set of visa lodgement and grant requirements, a key part of which is the relevant SOL which prescribes the selected skilled occupations which may be nominated for that visa subclass.

Nominating An Electrician On The Skilled Occupation List

Different SOLs apply to each skilled visa subclass. For example, the Subclass 482 Temporary Skill Shortage (TSS) visa, which is a temporary employer sponsored visa, is subject to a Short‑term Skilled Occupation List (STSOL), a Medium and Long‑term Strategic Skills List (MLTSSL) and a Regional Occupation List (ROL). The skilled occupation list that applies to an occupation determines whether it may be nominated under the short-term or medium-term stream of the subclass 482 visa program.

If the occupation is included on the STSOL, it may be nominated under the short-term stream. If the occupation is included on either the MLTSSL or the ROL, it may be nominated under the medium-term stream. There is also a labour agreement stream which applies where the sponsoring employer has a labour agreement in place, and that agreement specifies the occupation/s that may be nominated for a TSS visa.

Electrician occupations are included on the MLTSSL, and so may be nominated by an employer for a TSS visa under the medium-term stream. This also provides a pathway to a permanent residency visa after two years via the Subclass 186 ENS visa (this is discussed further below).

Nominating An Electrician Under A Labour Agreement For An Australia Electrician Visa

A labour agreement is negotiated between the Australian Government (represented by the Department of Home Affairs) and employers who seek to sponsor overseas workers for their business.

Labour agreements enable approved businesses to sponsor skilled overseas workers when there is a demonstrated need that cannot be met in the Australian labour market and the standard temporary or permanent visa programs are not available (for example, the occupation which the employer is seeking to nominate is not included on the SOL for the TSS, SESR or ENS visa programs).

One of the main benefits of entering into a labour agreement is its flexibility as it enables an employer to negotiate terms that meet the needs of the business (different types of agreements allow for varying levels of flexibility). This means that an employer may be able to negotiate certain concessions to the skilled visa criteria that would normally apply under the standard employer sponsored visa grant requirements. This can include requirements relating to English language competency, salary and age thresholds. A labour agreement can also be used to employ overseas workers in new or emerging occupations that are not defined in the ANZSCO.

Under a labour agreement, an employer can sponsor or nominate suitably skilled overseas workers for an employer sponsored skilled visa in accordance with the terms which have been negotiated with the Department of Home Affairs (the Department) in the executed labour agreement (different types of agreements allow for varying levels of flexibility).

There are five types of Labour Agreements, as listed below:

- Company specific labour agreements

- Designated Area Migration Agreements (DAMA)

- Project agreements

- Global Talent Employer Sponsored (GTES) agreements

- Industry labour agreements

To learn more about labour agreements, including the different types of labour agreements and how they operate, please refer to our article on a Labour Agreement Visa.

Skills Assessment

To be deemed ‘suitably qualified’ for a nominated occupation under the skilled visa program, applicants are required to demonstrate that they possess a minimum level of skills, qualifications and/or employment experience as prescribed by the migration provisions for the relevant skilled visa class which is being applied for. This may include the requirement that an applicant obtains a positive skills assessment in their nominated occupation (to be completed by a specified skills assessing body). The skills assessment must be within the accepted validity date (which is normally either three years from the date of issue, or on a date earlier if specified in the skills assessment).

It must also be the correct type of skills assessment. Applicants must have a skills assessment that meets the requirements for the visa for which they are applying. For example, some assessing authorities offer a provisional skills assessment for recent graduates of Australian educational institutions who are applying for a Subclass 485 Temporary Graduate visa. A provisional skills assessment issued for this purpose is not a suitable skills assessment for a permanent residence skilled visa application, for example.

Skills Assessments For Electricians

The prescribed skills assessing body for electricians is Trades Recognition Australia (TRA). We provide further information about the TRA requirements for motor mechanics in our discussion below.

English Language

English language criteria also apply, which may require applicants to complete a prescribed English language test and achieve a specified minimum test score (there are exemptions in certain cases). Be aware that English test results are valid for a limited period (depending on the class of visa being applied for and the level of English competency required).

What Are The Possible Skilled Australia Electrician Visa Options?

Set out below are the main types of electrician visa Australia options available. We also provide links to further information on these skilled visa options at the conclusion of this article.

General Skilled Migration

The General Skilled Migration (GSM) visa program offers the following skilled visa options (all of which are points-based) for electricians:

- Subclass 189 Skilled (Independent) visa;

- Subclass 190 Skilled (Nominated) visa (a permanent residence visa that requires State Sponsorship approval); and

- Subclass 491 Skilled Work Regional (Provisional) visa.

The GSM program operates under an invitation-based system, whereby applicants must first lodge an Expression of Interest (EOI) with the Department of Home Affairs (the Department). Only upon receipt of an invitation can applicants then proceed to apply for the visa itself. Periodically, we publish a summary of the results for invitations issued in the most recent invitation round (which normally takes place quarterly). We refer you to the latest invitation round results.

Electrician PR In Australia Visa

The subclass 189 visa grants you immediate permanent residence in Australia. It is a points-tested electrician PR in Australia visa, which means that you need to attain at least 65 points in the migration points test to be eligible.

The same applies to the subclass 190 visa, although you need to be nominated by a State or Territory Government to qualify. Note that you will be granted 5 additional points on account of the nomination.

Electrician PR In Australia Pathway Visa

As an electrician, you may also be nominated by a State or Territory government agency, or be sponsored by an eligible relative, for a Subclass 491 Skilled Work Regional (Provisional) visa. This visa is also a points-tested visa. This means that to apply (and qualify for) a subclass 491 visa, you will need to gain at least 65 points to be eligible. This visa option grants you an additional 15 points for the nomination/sponsorship.

After you have held a subclass 491 visa for three years, you may be eligible for permanent residency as an electrician via a Subclass 191 Permanent Residence (Skilled Regional) visa, provided you meet specified requirements.

The term of the subclass 491 visa is five years. As a subclass 491 visa holder (including any accompanying visa dependents), you must live, work and study only in a designated regional area of Australia.

Subclass 491 visa holders have unrestricted rights to travel to and from Australia during the visa term and are also entitled to enrol in Medicare, Australia’s public health system.

Electrician Sponsorship Australia Employer Sponsored Skilled Visa

An electrician may also qualify for a Subclass 482 Temporary Skill Shortage (TSS) visa, which is an employer sponsored temporary visa that may be granted for up to four years. It consists of three visa streams, namely, a Short-term, Medium-term and Labour Agreement stream (the labour agreement stream includes nomination in regional areas of Australia under a Designated Area Migration Agreement).

Electricians may currently be sponsored for a TSS visa under the medium-term stream, which provides a pathway to permanent residency after two years.

Employer Nominated Skilled Electrician Visa Australia

Electricians who are seeking an employer nominated permanent residence visa and who are prepared to commit to remaining with their nominating employer for at least two years from visa grant may consider a Subclass 186 Employer Nomination Scheme (ENS) visa.

The subclass 186 employer nominated visa comprises of a Direct Entry, Temporary Residence Transition (TRT) and Labour Agreement stream. The TRT option provides a pathway to permanent residence for TSS subclass 482 visa holders after two years. This pathway is also available under the labour agreement stream in certain cases. The Direct Entry stream is for eligible applicants who automatically qualify for permanent residence.

Electrician Sponsorship Australia Employer Sponsored Regional Visa

The Subclass 494 Skilled Employer Sponsored Regional (SESR) (Provisional) visa is a provisional visa which provides a pathway to permanent residence with the Subclass 191 Permanent Residence (Skilled Regional) visa after three years if you meet specified requirements at that time. The term of the subclass 494 visa is five years.

As a SESR visa holder, you are required to live and work in a designated regional area of Australia. You will also be able to travel to and from Australia on an unrestricted basis over the visa term. And you will be entitled to enrol in Medicare.

Which Electrician Occupations May Qualify For Electrician Immigration Australia?

For migration law purposes, each nominated occupation is defined based on the Australian and New Zealand Standard Classification of Occupations (ANZSCO). The ANZSCO occupational classification system provides a general description of each occupation, skill level, registration and/or licensing requirements and the tasks and duties that may be required to be performed as part of each occupation. Each occupation is assigned a unique ANZSCO code, which is used to identify the occupations that are eligible for a skilled visa for Australia.

The following occupational categories for electricians contained in ANZSCO may be nominated for a skilled electrician visa Australia (classified as a minor group):

- Automotive Electricians and Mechanics (minor group 321); and

- Electricians (minor group 341).

Each minor category is then broken down into unit groups of occupations. The next level below this are specific occupations, which are each identified using an ANZSCO code. Skilled visa eligibility is, in part, based on whether your occupation appears on the Skilled Occupation List (SOL) for the skilled visa that you are seeking to apply for.

Our discussion will follow the ANZSCO structure as we have outlined above. We will start by looking at the minor groups listed above. We will then explore the unit groups that makes up these minor groups. We then conclude with the most important component in this discussion, that being the specific electrician occupations that may be nominated for a skilled Australia electrician visa.

Minor Group 321 – Automotive Electricians and Mechanics

Let us now take a look at ANZSCO minor group 321 for Automotive Electricians and Mechanics.

ANZSCO General Description: Automotive Electricians and Mechanics repair and maintain automotive electrical systems and motor vehicle and other internal combustion engines. Mechanical Engineering Trades Workers are excluded from this minor group. Mechanical Engineering Trades Workers are included in Minor Group 323 Mechanical Engineering Trades Workers.

ANZSCO Skill level: Most occupations in this minor group have a level of skill commensurate with an AQF Certificate III including at least two years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3).

At least three years of relevant experience may substitute for the formal qualifications listed above. In some instances relevant experience and/or on-the-job training may be required in addition to the formal qualification.

Tasks include:

- diagnosing electrical and mechanical faults in motor vehicles and small engines

- dismantling engines and electrical systems

- repairing and replacing worn and defective parts

- installing electrical equipment and electronic components in motor vehicles

- testing and adjusting electrical and mechanical systems and parts after repair for proper performance

- performing scheduled maintenance on motor vehicles

The 321 minor group comprises the following unit groups:

- 3211 Automotive Electricians;

- 3212 Motor Mechanics.

Set out below are the specific electrician occupations that may be nominated and therefore may qualify for an electrician visa Australia.

Unit Group 3211 – Automotive Electricians

This unit group consists of the following electrician occupation that may be nominated for an Australia electrician visa, with the following common elements.

ANZSCO General Description: Automotive Electricians install, maintain and repair electrical wiring and electronic components in motor vehicles.

ANZSCO Skill level: Most occupations in this unit group have a level of skill commensurate with an AQF Certificate III including at least two years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3).

Tasks include:

- using test equipment to locate electrical and electronic malfunctions

- dismantling and removing electrical and electronic assemblies and components

- installing electrical equipment and electronic components in motor vehicles

- connecting power-operated vehicle equipment and accessories to power supply

- adjusting engine control systems and timing

- testing and replacing defective alternators, generators, voltage regulators and starter motors

- repairing and replacing faulty ignition and electrical wiring

- replacing defective parts such as fuses, lamps and switches

Skill assessing authority: TRA

Skilled Occupation List: Medium and Long-term Strategic Skills List (MLTSSL)

Skilled Visa Options:

- Subclass 189 Skilled (Independent) visa

- Subclass 190 Skilled (Nominated) visa

- Subclass 186 Employer Nomination Scheme (ENS) visa

- Subclass 407 Training visa

- Subclass 482 Temporary Skill Shortage (TSS) visa (Medium Term Stream)

- Subclass 485 Temporary Graduate visa (Graduate Work Stream)*

- Subclass 491 Skilled Work Regional (provisional) visa (State or Territory nominated)

- Subclass 491 Skilled Work Regional (provisional) visa (Family sponsored)

- Subclass 494 Skilled Employer Sponsored Regional (provisional) visa (Employer sponsored stream)

* Potential applicants may also qualify under the Post-Study Work Stream, which does not apply a Skilled Occupation Lis

A description of the occupation in the Automotive Electricians ANZSCO group is listed below.

ANZSCO Occupation	ANZSCO code	ANZSCO Description
Automotive Electrician Alternative title: Automotive Electrical Fitter	321111	Installs, maintains and repairs electrical wiring and electronic components in motor vehicles. Registration or licensing may be required.

Minor Group 341 – Electricians

Let us now take a look at ANZSCO minor group 341 for Electricians.

ANZSCO General Description: Electricians design, assemble, install, test, commission, diagnose, maintain and repair electrical networks, systems, circuits, equipment, components, appliances and facilities for industrial, commercial and domestic purposes, and service and repair lifts, escalators and related equipment. Automotive Electricians are excluded from this minor group. Automotive Electricians are included in Unit Group 3211 Automotive Electricians.

Tasks Include:

- examining blueprints, wiring diagrams and specifications to determine sequences and methods of operation

- measuring and laying out installation reference points

- selecting, cutting and connecting wire and cable to terminals and connectors

- using electrical and electronic test instruments to trace and diagnose faults

- repairing or replacing faulty wiring and defective parts

- positioning and installing electrical switchboards

- connecting electrical systems to power supply

- testing continuity of circuit

- installing, testing and adjusting electric and mechanical parts of lifts

Set out below is the specific electrician occupation that may be nominated and therefore may qualify for an Australia electrician visa.

Unit Group 3411 – Electricians

This unit group consists of one electrician occupation, with the following common elements.

ANZSCO General Description: Electricians design, assemble, install, test, commission, diagnose, maintain and repair electrical networks, systems, circuits, equipment, components, appliances and facilities for industrial, commercial and domestic purposes, and service and repair lifts, escalators and related equipment. Automotive Electricians are excluded from this unit group. Automotive Electricians are included in Unit Group 3211 Automotive Electricians.

ANZSCO Skill level: Most occupations in this unit group have a level of skill commensurate with an AQF Certificate III including at least two years of on-the-job training, or AQF Certificate IV (ANZSCO Skill Level 3).

Tasks include:

- examining blueprints, wiring diagrams and specifications to determine sequences and methods of operation

- measuring and laying out installation reference points

- selecting, cutting and connecting wire and cable to terminals and connectors

- using electrical and electronic test instruments to trace and diagnose faults

- repairing and replacing faulty wiring and defective parts

- positioning and installing electrical switchboards

- connecting electrical systems to power supply

- testing continuity of circuit

- installing, testing and adjusting electric and mechanical parts of lifts

Skill assessing authority: TRA

Skilled Occupation List: Medium and Long-term Strategic Skills List (MLTSSL)

Skilled Visa Options:

- Subclass 189 Skilled (Independent) visa

- Subclass 190 Skilled (Nominated) visa

- Subclass 186 Employer Nomination Scheme (ENS) visa

- Subclass 407 Training visa

- Subclass 482 Temporary Skill Shortage (TSS) visa (Medium Term Stream)

- Subclass 485 Temporary Graduate visa (Graduate Work Stream)*

- Subclass 491 Skilled Work Regional (provisional) visa (State or Territory nominated)

- Subclass 491 Skilled Work Regional (provisional) visa (Family sponsored)

- Subclass 494 Skilled Employer Sponsored Regional (provisional) visa (Employer sponsored stream)

* Potential applicants may also qualify under the Post-Study Work Stream, which does not apply a Skilled Occupation List.

A description of the electrician occupations in the Electricians ANZSCO group which may be nominated for an electrician visa Australia are listed below.

ANZSCO Occupation

ANZSCO code

ANZSCO Description

Electrician (General)

Alternative title: Electrical Fitter

Specialisations:
Armature Winder
Electrical Contractor
Heavy Coil Winder Railway Signal Electrician

341111

Installs, tests, connects, commissions, maintains and modifies electrical equipment, wiring and control systems. Registration or licensing is required.

Electrician (Special Class)

341112

Services and repairs intricate and complex electrical and electronic circuitry. Registration or licensing is required.

As you can see from the above discussion, electricians have several options for electrician immigration Australia, covering temporary, provisional and permanent options.

This includes the subclass 189 visa, which is an electrician PR in Australia visa. It requires a minimum of 65 electrician PR in Australia points to qualify.

The subclass 190 is also an electrician PR in Australia visa. It too requires a minimum of 65 electircian PR in Australia points to qualify. It is an electrician sponsorship Australia option which requires State sponsorship.

The subclass 491 visa is a provisional electrician immigration Australia option, which provides a pathway to permanent residency. It is also points-tested, requiring you to attain at least 65 electrician PR in Australia points to qualify. It too is an electrician sponsorship Australia option which requires state or family sponsorship.

The subclass 494 visa is a provisional regional employer sponsored electrician immigration Australia visa, which provides a pathway to permanent residency, and requires electircian sponsorship Australia by an employer.

Skill Assessments For Electricians

As noted in our introduction, the prescribed skills assessing body for electricians is Trades Recognition Australia (TRA). It has a number of skills assessment programs, depending on your country of passport, where you studied and the type of visa that you are seeking to apply for. The TRA Pathfinder is a good starting point to determine which skills assessment program to select based on your individual circumstances. Detailed guidelines are also available for each TRA assessment program.

We outline below the criteria for some of the main TRA skills assessment programs.

Provisional Skills Assessment (PSA)

A PSA will verify your:

- identity; and

- Australian qualifications.

If your assessment is successful, the outcome letter can be used to apply for a subclass 485 Temporary Graduate visa.

To apply for the Provisional Skills Assessment (PSA), you must have:

- a current and valid passport

- an Australian qualification directly relevant to the occupation you are applying for.

This qualification must be from a Registered Training Organisation (RTO) on the Commonwealth Register of Institutions and Courses for Overseas Students (CRICOS).

Before you apply, you should read the PSA Applicant Guidelines and check you can meet the requirements for submitting a decision-ready application.

A successful PSA outcome also means you meet the pre-requisite requirement to participate in the JRP, however, you must apply for the JRP within 3 years from the date of your PSA outcome.

TSS Skills Assessment

The TSS program is for applicants who need a skills assessment as part of their temporary skills shortage (subclass 482) visa application to the Department of Home Affairs.

To qualify for a TSS visa as an Automotive Electrician, you must obtain a positive skills assessment from the TRA (unless you are exempt) if you hold a passport from Fiji, Hong Kong SAR, India, Macau SAR, Philippines, South Africa, Thailand, Vietnam or Zimbabwe.

To qualify for a TSS visa as an Electrician (General), you must obtain a positive skills assessment (unless you are exempt) from the TRA if you hold a passport from Fiji, Hong Kong SAR, India, Macau SAR, Philippines, South Africa or Vietnam. Note that this is a licensed occupation for TRA skills assessment purposes.

To qualify for a TSS visa as an Electrician (Special Class), you must obtain a positive skills assessment (unless you are exempt) from the TRA if you hold a passport from Fiji, Hong Kong SAR, India, Macau SAR, Philippines, South Africa or Vietnam. Note that this is a licensed occupation for TRA skills assessment purposes.

The TSS outcome shows if you have the skills and experience needed at the required level to work in Australia in your nominated occupation.

To register for a TSS, you must have the required amount of employment experience in your occupation. Please check the TSS Applicant Guidelines for further information.

Offshore Skills Assessment

The OSAP is for applicants who need a skills assessment as part of their skilled migration visa application to the Department of Home Affairs.

The OSAP outcome shows if you have the skills and experience needed at the required level to work in Australia in your nominated occupation.

To register for OSAP, you must be:

- applying for a skilled migration visa to Australia (excluding 485 or TSS visas)

- working in a nominated occupation and hold a passport from a nominated country or Special Administrative Region (SAR)

You can apply for OSAP as an Automotive Electrician if you hold a passport from Fiji, Hong Kong SAR, India, Macau SAR, Philippines, South Africa, Thailand, Vietnam or Zimbabwe.

To register you must have the required amount of employment experience in your occupation. Please check the OSAP Applicant Guidelines.

Applicants from all countries in the occupation of Electrician (General) or an Electrician (Special Class) are required to have an OSAP assessment unless applying for a:

- Subclass 482 TSS visa; or

- Subclass 485 Temporary Graduate visa (refer to the Job Ready Program (JRP) on the TRA website).

Migration Skills Assessment

The Migration Skills Assessment (MSA) is for applicants who need a skills assessment as part of their skilled migration visa application to the Department of Home Affairs.

The MSA outcome recognises if you have the skills and experience needed at the required level to work in Australia in your nominated occupation.

You can only use a successful MSA outcome for your visa application to Home Affairs for migration purposes

To apply for MSA, you must:

- have a qualification directly related to your nominated occupation

- have the required amount of directly relevant employment in your occupation

- read the MSA Applicant Guidelines for employment requirements

- have your occupation listed on a skilled occupation list (with TRA listed as the relevant assessing authority).

Please refer to the TRA website for further information.

Get More Information

Skilled Visa Options For Selected Occupations

Please refer to our series of articles on the skilled visa options that are available for selected occupations below:

Visa Options For Professionals

Skilled Trade Visa Options In Australia

Australian Immigration And Visa Options For Doctors

Australian Immigration And Visa Options For Nurses

Australian Visa Options For Engineers

Migrate To Australia As A Plastics Moulder Machine Operator, Fabricator, Welder Or Technician

How To Migrate To Australia As A Pig Farmer Or A Senior Piggery Stockperson

Migrate To Australia As A Small Engine Mechanic

Migrate To Australia As A Sandblaster

Employer Sponsored Regional Visa

For further information on the subclass 494 regional employer sponsored visa, please see the following articles:

Skilled Regional Visa Australia

Regional Sponsor Migration Scheme

Regional Sponsored Visa Requirements

Employer Sponsored Visa

To learn more about an employer sponsorship visa, please see the following articles:

Employer Sponsored Visas

Employer Nomination Migration Scheme

Labour Agreement Visa

482 Visa Employer Obligations

457 Visa Replacement

Employer Sponsor Visa Requirements

Changes To 457 Temporary Work Skilled Visa

Business Requirements For Accredited Sponsorship

Self Sponsor Visa Australia

Does 482 Visa Require Skills Assessment

Subclass 482 – A Guide to Temporary Skill Shortage

Permanent Residence Eligibility Extended For Certain Subclass 457 And 482 Visa Holders

How To Sponsor An Employee For A Work Visa Or Permanent Residency

Overview Of Australian Work Visas And Employer Sponsorship

Guide To Australian Sponsorship Visa Costs

How To Become A Sponsor

Labour Market Testing Requirements

Skilled Visa

To learn more about applying for a skilled visa, please see the following articles:

Australian Skilled Migration Visa List

General Skilled Migration Visa Options

SAF Skilling Australians Fund Levy

General Skilled Migration Visa Points

Subclass 491 Regional Visa

Subclass 190 State Sponsorship Visa

Australian Skilled Occupations List

Australian Permanent Resident Visa Case Study

State Sponsorship Visas In Australia

South Australia State Sponsorship Opportunities

Skilled Regional Visa Australia

Regional Sponsor Migration Scheme

Regional Sponsored Visa Requirements

Visa Options For Professionals

Skilled Trade Visa Options In Australia

English Requirements For Skilled Visas

Adelaide 190 Visa

491 Visa Adelaide

Subscribe to our newsletter for regular updates and additional information.

Contact us to book a no-obligation consultation to find out more about applying for a skilled electrician visa Australia, including electrician immigration Australia and electrician sponsorship Australia options and to assess your eligibility to migrate to Australia as a carpenter.

* * * * * * * * * * * *

In conclusion, we note that the above discussion provides an overview of the Australian visa options for electricians, including electrician immigration Australia PR visa options and electrician sponsorship Australia options. We have also covered the TRA skills assessment requirements to migrate to Australia as an electrician, and have provided links to further information so that you can learn more about the skilled Australia electrician visa options that are available and the TRA skills assessment criteria.

Australia’s migration laws are complex, and each case is different. We recommend that you seek professional advice if you are seeking to migrate to Australia as an electrician, as being fully informed will give you the best chance of achieving a successful outcome on your case. A migration professional can help you to do this.

For up-to-date advice on the skilled visa options that are available for an electrician to migrate to Australia, including electrician sponsorship Australia and electrician PR in Australia options, book your confidential consultation with a migration agent in Adelaide. PAX Migration Australia is a leading immigration advice service based in Adelaide.